newest GPS&GPRS real-time guard tour system

1 GPS/GPRS real time guard tour system 2 can add RFID card reading fucntion 3 super durable and waterproof 4. panic button WM-5000P5 is a portable GPS guard tour system, which is an innovative product in guard tour field. With a GPS module inside,when collecting location information or starting to patrol, there is no need to install any button or signal card on the location. What you need to do is just to start GPS terminal unit, and use GPS to collect and trace accurate location information, including longitude, latitude, and patrol time. Through GPRS to transfer the data, the officer can track the people in real time. Also 5000P5 system is with PANIC button, when you meet something urgent, you can press this button. The officer will know that there is something happened in first time.It can be used widely in many areas, especially remote area, such as power transmission cable checking & management, telecom fiber cable checking & management and oil pipeline checking & management etc..

Features

Through GPRS network send real time patrol message to control centerGPS checking place collectionAdopt POGO PIN connector USB portSuper storage capacity, 60000 records storage capacity GPRS or USB cable communicationExtruded ABS plastic, super durable Waterproof and guard proofBrilliant exterior design, easy carrying Sabotage absorbent, easy maintenanceReal time internal clockResistant to electrical shockLong battery life, rechargeable 3.3v lithium battery

 

Technical Information

WM-5000P5 Physical Extruded ABS plastic case Water proof Ip67 Operating Temperature -25°to + 85°C Humidi t y 10% to 90% non-condensing S torage Capacity 60000 pieces records Battery 3.3 V Lithium Recharge Battery, 2000mAh; in normal condition, if the reader read about 240 signal cards per day, the battery will be charged each week; the battery can be used for about three years. Connection way POGO connector Communi cation GPRS or USB cable Weight 160g

Hardware quick start guide

1. Before use the equipment, you should install the software to the computer and have the initial setup, for example: collect position and name it as a place name, make route, set guard name and set sending message mode etc. Then through USB cable, download all these information to the reader.2. After preparation work, then the guard can start patrol.3. Then the guards go to the checkpoints, the Reader will automatically collect its position(longitude and attitude)When collecting successfully, the red indicator light accompanied by a "vibrations" means that a collection has been made. Then through GPRS, the patrol records can be sent to software in control center.4. For WM-5000P5 reader, it has two ways to communicate with control center, GRRS network and USB cable, for GPRS, after basic setup for communication between reader and software, 5000P5 reader is able to send real time patrol message to control center.That’s why we called WM-5000P5 is a real-time tracker for guard tour system.

 

newest GPS&GPRS real-time guard tour system